Low-pressure hose assemblies require properly placing the clamps so that they will seal and retain the fitting. The clamp position “A” dimension is very …
Challenging Conventional Thinking By Andrew Smulski, President, Fluid Conveyance, Danfoss Power Solutions. If you were asked to envision a fluid power …
By John Proegler, PHD, Inc. Combining a pneumatic power source for grippers on the end of electric robots provides the best of both technologies. In many …
By Bill Tyler, National Sales & Marketing Manager, and Chadwick Conte, Product Lifecycle Manager, Peninsular Cylinders. Selecting the right cylinder for a …
The Ace Specialties chicken breast deboner mimics hand trimming for low waste and high output by Steve Sterling. Among all the choices U.S. shoppers have in …
By Marlon Schwank, Industry 4.0 Expert, Industrial Systems Division Europe. In 1712 Thomas Newcomen invented the first effective steam engine to pump water …
There are three basic requirements to cause a double-acting cylinder to extend, as shown in Fig. 4.17: Flow must be supplied to the cap-end of the cylinder …
Welcoming a new era, Hodges brings 29 years of experience in the Fluid Power Industry. By Jeff Hodges. I was awestruck and honored when I was asked to be the …
By Dan Helgerson. Blaise Pascal, the French physicist, found that a confined fluid transmits externally applied pressure uniformly in all directions and that …
By Matthias Keck, Director of Technology, and Michael Cook, Global Segment Director, Fluid Power & Off-Highway In today’s environmental and economic …