Fluid Power Journal

Delta Adds Features to RMC200 Motion Controllers

Delta Computer Systems is increasing the number of axes on the current RMC200 from 32 to 50, enabling control of the maximum number of physical axes that fit in a RMC200 B15 Base module. Delta is also releasing the new RMC200 Lite controller for up to 18 axes of control, featuring a more compact form factor with a new integrated CPU/power supply module and new B5L and B7L Base modules. And Delta is decreasing the minimum loop times from 250μs to 125μs for more responsive control on fast-responding systems. 

These improvements offer industrial users even more flexibility in specifying the best RMC motion controller for their application, with the cost-effective RMC200 Lite for applications up to 18 axes, and the RMC200 Standard for applications that require up to 50 axes or require more processing power. Customers can easily adopt the new Lite controller, as it shares the same RMCTools software as all of Delta’s RMC controllers, and it supports all the same features as the Standard. 

The new RMC200 Lite CPU includes a built-in power supply, making it more compact than the standard RMC200. The RMC200 Lite uses the new B5L (up to three I/O modules) or B7L (up to five I/O modules) bases. While CPU/PS and Base modules are unique to the RMC200 Lite, all I/O modules are interchangeable between the Standard and Lite configurations for easier handling of spare modules. 

RMC200 Standard users can take advantage of the new increased axis capability and lower loop times simply by updating firmware and software at any time, free of charge. For each axis that is added, the feature key can be upgraded with additional control loops, either specified on initial purchase or upgraded in the field after sale, allowing the user to reconfigure the RMC200 controller to fit the application. Simple positioning applications require one control loop per axis, while other control schemes, such as position-pressure or position-force control, require more than one control loop per axis. 

For more information, call (360) 254-8688 or visit www.deltamotion.com.

Share this information.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Sponsor

Sponsors


Get Our Enews!