I maintain a mobile medical unit (hospital), which is a large semi-truck that opens up to over 1,000 square feet for emergency medical usage. Along with all …
This question varies a bit from the normal Air Teaser, however it still uses some of the same formulas that are used to determine a force to overcome motion. …
What will the cylinder do if the push button is pushed and held? What will the cylinder do if the push button is pushed and released with a 50-psi load on the …
If the rotary actuator has four 4″ diameter cylinders as shown, what would be the necessary pressure to rotate the shaft with a torque of 5000 lb. in.? …
A company has a machine that uses 50 cfm at 100 psi. Size an air compressor in SCFM that will have a duty cycle of 40%. Then size an air receiver in gallons …
Deadline Past. Not Available for Submissions. Winner: Mike Stoltenow, CFPS, Comatrol, Easley, SC Answered Correctly: Edward Day, CFPPS, Norgren, Inc., …
This month’s problem is to convert a manually operated sheet metal shear to operate on pneumatics. Looking at the diagram, you will see the placement of the …
The figure shows a door to open with an air cylinder pushing at a 45-degree angle. The door is 48 inches high and weighs 100 pounds. It needs to open 90 …
