Product Review
Axial Piston Pump
The Type V40M-028H axial piston pump is suitable for hydraulic fan controls in mobile machines. The pump will displace volumes up to 28 cm3/rev and is designed …
Rod Clamp for Hydraulic Cylinders
The AMLOK® Hydraulic Series RCH rod clamp provides power-off clamping of rods and shafts. The clamps are actuated by a spring/collet mechanism and unclamped …
Stainless Steel Control Valve
The 280 series of hydraulic high-pressure, near-zero-leak directional control valves are designed for use in marine and offshore hydraulic control/power units. …
Safety Grippers
In an emergency shut-off event, the EGN Safety gripping unit goes into a safety-speed or safe-stop mode, depending on the activated protection zone. When the …
Hose Products
The UNIFLEX Hose Products Division manufactures a wide range of interlock, multi-spiral, reusable, wire-braided fittings in one-piece and two-piece …
Telematics Platform
Danfoss Telematics Solutions is a powerful, easy-to-integrate telematics platform with a “plug-and-perform” design for mobile off-highway equipment. It is …
Industrial Pressure Switches
The industrial pressure switches offer ranges from vacuum to 10,000 psi with wetted-parts material options to fit multiple applications, such as HVAC, gas …
Pressure Transducers
The 3100 series pressure transducers incorporate a sputtered thin-film pressure-sensing element and all stainless steel wetted parts. They are available in …
Electronic Pressure Transducer/Switch
The TDEPD electronic pressure transducer/switch introduces a patented, programmable display that can be set to revolve, hold at a fixed angle, or inverted for …
Mechatronic Gripper
This small-part gripper expands the EGP series with the addition of the smaller size 25. The gripper weighs 110 g and has a stroke of 3 mm per finger. Gripping …
Large-Capacity Bladder Accumulators
Bladder accumulators in sizes up to 45-gallon capacity enable the use of fewer accumulators (as compared to smaller 10, 11, or 15-gallon sizes) and their …
Servo-Proportional Valve
The expansion of the AxisPro® product line now includes a two-stage, D08 size design featuring valve position feedback on the pilot and main stage. The valves …
Industrial Joystick
The JS-H100 industrial joystick base utilizes sealed non-contacting Hall-effect sensors and an all-metal body design. This small and rugged joystick is suited …
Inductive Linear Position Sensor
The MHP series linear inductive sensors are designed for installation into the rear end-cap of hydraulic cylinders for operation at pressures up to 5,000 psig. …
Gear Pumps
The Optimum® series of gear pumps/motors is designed for durability, featuring a rigid pump design for long product life and maintained performance. Available …
Stainless Steel Pneumatic Cylinders
Designed for use in a broad range of applications, including those in wash down and caustic environments, these cylinders are constructed of 303 and 304 …
Variable-Speed Fan Controllers
The company’s family of variable-speed fan controllers has been expanded with the addition of CE and CSA-certified EMC and EMC-6 controllers, which are fully …
Electro-Hydraulic Controller
The DS2R electro-hydraulic controller features proportional valve technology and replaces the DS1 model. It is fitted directly to the secondary control …
Wireless Radio Remote Controls
The V and RP series 2.4 GHz wireless radio remote controls are built with the latest wireless and microprocessor technology, including a 32-bit ARM-Core …
Parallel Grippers
The WSG series of servo-electric, two-finger parallel grippers are designed for parts handling and assembly processes requiring high flexibility or …
Sponsor
Sponsors