Fluid Power Journal

LA-MAN Releases Filtration Series for Compressed Air Systems

LA-MAN Corporation recently introduced an Extractor/Dryer series to remove moisture and contaminates from compressed air systems.

The Extractor/Dryer is a two-stage filter designed to operate most effectively within 25 feet of the point of use. Each model offers a standard 5-micron rating with lower micron ratings available. With flow ranges of 15 scfm to 2,000 scfm and pressure ratings of up to 250 psi (17 bar), the Extractor/Dryer is an ideal solution for applications including air-powered tools, surface preparation, paint spraying, powder coating, and pneumatically operated equipment.          

Additional features of the Extractor/Dryer include a built-in differential pressure gauge and weep drain. The differential pressure gauge provides a visual indication of required maintenance, which is easily accomplished with the installation of the appropriate service kit and without removing the unit from the air system. The weep drain allows for a continual discharge of moisture from the Extractor/Dryer and may be replaced by a float drain or an electronic drain valve for more precise control.

For more information, visit www.laman.com.

Share this information.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Sponsor

Sponsors


Get Our Enews!